C o n f i g u r i n g S w i t c h I n f o r m a t i o n
265
V L A N L A G S e t t i n g P a g e
The
VLAN LACP Parameters
page
contains the following fields:
•
LAG
—Indicates the LAG number included in the VLAN.
•
Port Mode
—Indicates the port mode. The possible field values are:
–
General
—Indicates that the LAG belongs to one or more VLANs, and each VLAN
is user-defined as tagged or untagged (full 802.1Q compliance).
–
Access
—Indicates that the LAG belongs to a single untagged VLAN.
–
Trunk
—Indicates that the LAG belongs to a VLAN where all frames are tagged
(except for an optional single native VLAN).
•
PVID
—Assigns a VLAN ID to untagged packets. In order for LAGs to assign PVIDs,
the LAG must be defined as untagged in the
VLAN Port Membership Table
.
•
Frame Type
—Indicates the packet type accepted by the LAG. The possible field
values are:
–
Admit Tag Only
—Indicates that only tagged packets are accepted by the LAG.
–
Admit All
—Indicates that both tagged and untagged packets are accepted by the
LAG.