54
C o n f i g u r i n g t h e Po w e r C o n n e c t 3 3 2 4 / 3 3 4 8 S w i t c h
www
.dell.com | support.dell.com
When configuring/receiving IP addresses through DHCP and BOOTP, the configuration
received from these servers includes IP address, and may include subnet mask and default
gateway.
Retrieving an IP address from a DHCP Server
When using the DHCP protocol to retrieve an IP address, the device acts as a DHCP client.
To retrieve an IP address from a DHCP server:
1
Select and connect any port to a DHCP server or to a subnet which has a DHCP server
on it, in order to retrieve the IP address.
2
Enter the following commands to use the selected port for receiving the IP address, as
shown in the following example.
console> enable
console# configure
console(config)# interface vlan 1
console(config-if)# ip address dhcp hostname <string>
console(config-if)# exit
console(config)# exit
3
The device receives the IP address automatically.
To verify the IP address:
1
Type
show ip interface
at the system prompt. See the following display example.
console> enable
console# show ip interface
Gateway IP Address
Activity status
----------------------- -----------------------
IP Address
I/F
----------------------- ----------------------
10.1.1.1/8
vlan1