C o n f i g u r i n g t h e Po w e r C o n n e c t 3 3 2 4 / 3 3 4 8 S w i t c h
45
Baud Rate
The baud rates can be manually changed to any of the following values:
•
2400
•
4800
•
9600
•
19,200
•
38,400
•
57,600
•
115,200
NOTE:
The default baud rate is 9600.
NOTE:
Closing the device does not return the default baud rate. It must be specifically
configured.
NOTE:
In order to enter configuration mode, you must specify administrative level 15
privileges.
The following is an example configuration for changing the default baud rate using CLI
commands:
console> enable
console# configure
console(config)# line console
console(config-line)# speed 9600
console(config-if)# exit
console(config)# exit
Terminal Connection Configuration
The PowerConnect 3324/3348 requires the following Terminal Connection parameters for
configuration:
•
no parity
•
one stop bit
•
8 data bits
