C o n f i g u r i n g S y s t e m I n f o r m a t i o n
117
–
Warning
—Indicates the lowest level of a device warning. The device is
functioning, but an operational problem has occurred.
–
Notice
—Provides the network administrators with device information.
–
Informational
—Provides device information.
–
Debug
—Provides detailed information about the log. If a Debug error occurs,
contact Dell Online Technical Support (
www.support.dell.com
).
NOTE:
When a severity level is selected, all severity level choices above the selection are
selected automatically.
The
Global Log Parameters
page also contains check boxes that correspond to a distinct
logging system:
•
Console
—Indicates the minimum severity level from which logs are sent to the
console.
•
RAM Logs
—Indicates the minimum severity level from which logs are sent to the Log
File kept in RAM (Cache).
•
Log File
—Indicates the minimum severity level from which logs are sent to the Log
File kept in FLASH memory.
Enabling Logs:
1
Open the
Global Log Parameters
page.
2
Select
Enable
in the
Logging
drop-down list.
3
Select the log type and log severity in the
Global Log Parameters
check boxes.
4
Click
Apply Changes
. The log settings are saved, and the device is updated.
Enabling Logs Using CLI Commands
The following table summarizes the equivalent CLI commands for viewing fields displayed
in the
Global Log Parameters
page.
CLI Command
Description
logging on
Enables error message logging.
logging
ip-address
[port
port
]
[severity
level
] [facility
facility
]
[description
text
]
Logs messages to a syslog server. For a list of the Severity levels,
see
"
Log Severity Levels
".
logging console
level
Limits messages logged to the console based on severity.
