C o n f i g u r i n g Q u a l i t y o f S e r v i c e
349
D S C P M a p p i n g P a g e
The
For the list of the DSCP default queue settings,
contains the following fields:
NOTE:
In a stacking configuration, Queue 4 is used for forwarding stacking traffic. Therefore,
assigning additional traffic to Queue 4 may interfere with stack control.
•
DSCP In
—Indicates the values of the DSCP field within the incoming packet.
•
Queue
—Indicates the queue to which packets with the specific DSCP value are
assigned. The values are 1-4, where one is the lowest and four is the highest value.
Mapping a DSCP value and assigning priority queue:
1
Open the
DSCP Mapping
page.
2
Select a value in the
DSCP In
column.
3
Define the
Queue
fields.
4
Click
Apply Changes
. The DSCP is not overwritten, and the value is assigned a
forwarding queue.
Assigning DSCP Values Using the CLI Commands
The following table summarizes the equivalent CLI commands for configuring fields in the
DSCP Mapping
page.
