C o n f i g u r i n g t h e Po w e r C o n n e c t 3 3 2 4 / 3 3 4 8 S w i t c h
57
Configuring Security Passwords
The security passwords can be configured for the following services:
•
Console
•
Telnet
•
SSH
•
HTTP
•
HTTPS
NOTE:
Passwords are user-defined.
NOTE:
When creating a user name, the default priority is "1", which allows access but not
configuration rights. A priority of "15" must be specifically set to enable access and
configuration rights to the device.
For more information about password limitation, see "
Configuring Network Security
".
Configuring an Initial Console Password
To configure an initial console password, enter the following commands:
console> enable
console# configure
console(config)# aaa authentication login default line
console(config)# aaa authentication enable default line
console(config)# line console
console(config-line)# login authentication default
console(config-line)# enable authentication default
console(config-line)# password console
console(config-line)# exit
console(config)# exit
•
When initially logging on to a device through a console session, enter
console
at the
password prompt.
•
When changing a device’s mode to enable, enter
console
at the password prompt.
