C o n f i g u r i n g S y s t e m I n f o r m a t i o n
165
The following fields set the RADIUS default values:
•
Default Timeout for Reply (1-30)
—Specifies the default amount of time (in seconds)
the device waits for an answer from the RADIUS server before timing out.
NOTE:
If
Host Specific Timeouts, Retransmit, Dead Time
, or
Deny
values are not specified, the
Global values are applied to each host.
•
Default Retries (1-10)
—Specifies the default number of transmitted requests sent to
RADIUS server before a failure occurs.
•
Default Dead time (0-2000)
—Specifies the default amount of time (in seconds) that
a RADIUS server is bypassed for service requests. The range is 0-2000.
•
Default Key String (1-16 Characters)
—Indicates the Default Key string used for
authenticating and encrypting all RADIUS communications between the device and
the RADIUS server. This key is encrypted.
•
Source IP Address
—Indicates the default IP Address for the device accessing the
RADIUS server.
Defining RADIUS Parameters:
1
Open the
RADIUS Settings
page.
2
Define the
Default Timeout for Reply, Default Retries, Default Dead Time
, and
Default Key Strings
fields.
3
Click
Apply Changes
. The RADIUS settings are updated to the device.
Adding a RADIUS Server:
1
Open the
RADIUS Settings
page.
2
Click
Add
. The
Add
RADIUS Settings
page opens:
A d d R A D I U S S e r v e r P a g e
