Dell 2135 Color Laser Troubleshooting Manual Download Page 247

Page: 247 / 260

From the Printer Operator Panel

Press

until

>SETUP

appears, and then press

Press

until

>Reports

appears, and then press

System Settings

is displayed. Press

The System Settings page is printed.

Verify the capacity of the installed memory listed in the system settings under

General

If the memory capacity has not increased, turn off the printer, unplug the power cable, and reinstall the memory card.

From Your Computer

Click

start

All Programs

Dell Printers

Additional Color Laser Software

Quick Launch Utility.

The

Quick Launch Utility

dialog box opens.

Click the

Tool Box

button.

The

Tool Box

dialog box opens.

Select the printer from

Printer Name

The

Tool Box

opens.

Click the

Printer Settings Report

tab.

Select

Reports

from the list at the left side of the page.

The

Reports

page is displayed.

Click the

System Settings

button.

The System Settings page is printed.

Verify the capacity of the installed memory listed in the system settings under

General

If the memory capacity has not increased, turn off the printer, unplug the power cable, and reinstall the memory card.

Updating your PCL Driver

If you installed the additional print memory after installing the printer driver, update your driver by following the instructions for the operating system you are
using. If the printer is on a network, update the driver for each client.

Click

start

Printers and Faxes

For Windows

2000: Click

Start

Settings

Printers

For Windows Server

2003: Click

Start

Printers and Faxes

For Windows Vista

: Click

Start

Control Panel

Hardware and Sound

Printers

For Windows Server 2008: Click

Start

Control Panel

Printers

Right-click the printer and select

Properties

Click the

Options

tab, and then select

Get Information from Printer

Verify the capacity of the installed memory listed on the

Memory Capacity:

drop-down list.

Click

Apply

, and then click

Close the

Printers and Faxes

folder.

Summary of Contents for 2135 Color Laser





































































































































































































































































Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands

Dell 2135 Color Laser, Troubleshooting Manual

Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands