Dell 2135 Color Laser Troubleshooting Manual Download Page 143

Page: 143 / 260

Toner smears or print comes off.

Random spots/blurred images

The entire output is blank.

Is the problem resolved?

Action

Yes

The print media surface may be uneven. Try changing the

Paper Type

setting in the printer driver. For example,

change the plain paper to thick.

On the

Paper/Output

tab, change the

Paper Type

setting.

Is the problem resolved?

The task is
complete.

Go to action
2.

Verify that the correct print media is being used. See

"Supported Paper Types"

. If not, use the print media

recommended for the printer.

Is the problem resolved?

The task is
complete.

Go to action
3.

Replace the PHD unit if you have a spare unit.

Replace the PHD unit. See

"Replacing the Print Head Device (PHD) Unit"

and

"Installing the PHD Unit"

After you replace the PHD unit, test print your document again.

Is the problem resolved?

The task is
complete.

Go to action
4.

Replace the fuser if you have a spare.

Replace the fuser. See the fuser replacement guide,

Replacing the Fuser

After you replace the fuser, test print your document again.

Is the problem resolved?

The task is
complete.

Contact Dell.

Action

Yes

Ensure that the toner cartridges are installed correctly. See

"Installing the Toner Cartridges"

Is the problem resolved?

The task is
complete.

Go to action
2.

Ensure that the PHD unit is installed correctly. See

"Replacing the Print Head Device (PHD) Unit"

and

"Installing the

PHD Unit"

Is the problem resolved?

The task is
complete.

Go to action
3.

Replace the PHD unit if you have a spare unit.

Replace the PHD unit. See

"Replacing the Print Head Device (PHD) Unit"

and

"Installing the PHD Unit"

After you replace the PHD unit, click

Chart Print

on the

Diagnosis

tab.

Click the

Pitch Configuration Chart

button.

The Pitch Configuration Chart is printed.

Is the problem resolved?

The task is
complete.

Contact Dell.

Summary of Contents for 2135 Color Laser





































































































































































































































































Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands

Dell 2135 Color Laser, Troubleshooting Manual

Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands