Dell 2135 Color Laser Troubleshooting Manual Download Page 144

Page: 144 / 260

Streaks appear on the output.

Action

Yes

The toner cartridges may be low or need to be replaced. Confirm the amount of toner left in each toner cartridge.

Check the toner level in the

Status

tab in the Status Monitor.

Replace the toner cartridges as necessary.

Is the problem resolved?

The task is
complete.

Go to
action 2.

If you are using non-Dell brand toner cartridges, disable the

Non-Dell Toner

option.

Launch the Tool Box, and click

Non-Dell Toner

on the

Printer Maintenance

tab.

Ensure that the

check box is not selected.

Is the problem resolved?

The task is
complete.

Go to
action 3.

Disable the

Toner Saving Mode

in the printer driver.

On the

Advanced

tab, ensure that the

Toner Saving Mode

check box is not selected.

Is the problem resolved?

The task is
complete.

Go to
action 4.

The print media surface may be uneven. Try changing the

Paper Type

setting in the printer driver. For example, change the

plain paper to thick.

On the

Paper/Output

tab, change the

Paper Type

setting.

Is the problem resolved?

The task is
complete.

Go to
action 5.

Verify that the correct print media is being used. See

"Supported Paper Types"

. If not, use the print media recommended

for the printer.

Is the problem resolved?

The task is
complete.

Go to
action 6.

Ensure that eight yellow ribbons are correctly removed from the PHD (Print Head Device) unit. See

"Replacing the Print

Head Device (PHD) Unit"

and

"Installing the PHD Unit"

. If not, remove the ribbons.

Is the problem resolved?

The task is
complete.

Go to
action 7.

Ensure that the developer motor functions properly.

Launch the Tool Box, and click

Machine Check

on the

Diagnosis

tab.

Select

Main Motor Operation Check

from the drop-down list box and click the

Start

button.

Click the

Play of Sound

button to check the motor sound.

Does the motor function properly?

Go to action 8.

Contact
Dell?

Ensure that the dispense motor for each toner cartridge functions properly.

Launch the Tool Box, and click

Machine Check

on the

Diagnosis

tab.

Select

Dispense Motor Check (Yellow), Dispense Motor Check (Magenta)

Dispense Motor Check (Cyan)

, or

Dispense Motor Check (Black)

from the drop-down list box, and click the

Start

button.

Click the

Play of Sound

button to check the motor sound.

Repeat step 2 and 3 to perform Dispense Motor Check for the rest of the toner cartridges.

NOTE:

You can perform Dispense Motor Check for CMYK in any order you desire.

Does the dispense motor function properly?

Go to action 9.

Contact
Dell?

Replace the PHD unit. See

"Replacing the Print Head Device (PHD) Unit"

and

"Installing the PHD Unit"

After you replace the PHD unit, click

Chart Print

on the

Diagnosis

tab.

Click the

4 Colors Configuration Chart

button.

The 4 Colors Configuration Chart is printed.

Is the problem resolved?

The task is
complete.

Contact
Dell.

Summary of Contents for 2135 Color Laser





































































































































































































































































Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands

Dell 2135 Color Laser, Troubleshooting Manual

Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands