Dell 2135 Color Laser Troubleshooting Manual Download Page 246

Page: 246 / 260

Push the memory card into the slot firmly.

Close the memory cover halfway until it stops, and then slide it towards the front of the printer.

Close the memory cover completely and slide it again towards the front of the printer.

10.

Turn the screw in the clockwise direction.

11.

Turn on the printer.

Print and Check the System Settings Page

Print a System Settings page to verify that the optional memory card is installed correctly.

NOTE:

Ensure that the memory card is firmly fixed in the slot and cannot be moved easily.

Summary of Contents for 2135 Color Laser





































































































































































































































































Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands

Dell 2135 Color Laser, Troubleshooting Manual

Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands