Dell 2135 Color Laser Troubleshooting Manual Download Page 181

Page: 181 / 260

Entering Values

From the Printer Operator Panel

Using the operator panel, enter the values found in the color registration chart to make adjustments.

Press

until

>SETUP

appears, and then press

Press

until

>Admin Menu

appears, and then press

Press

until

>Maintenance

appears, and then press

Press

until

>Color Reg Adjust

appears, and then press

Press

until

>Enter Adjustment

appears, and then press

>Lateral Adjustment

is displayed. Press

to specify the values for the lateral direction.

The cursor is located at the first digit of the

Lateral Adjustment

Press

until you reach the value (for example,

) displayed on the chart.

Press once and move the cursor to the next value.

Repeat steps 6 and 7 to enter all of the digits of the

Lateral Adjustment

, and then press

10.

Press

until

>Process Adjustment

appears, and then press

to specify the values for the process direction.

The cursor is located at the first digit of the

Process Adjustment

11.

Press

until you reach the value (for example,

) displayed on the chart.

12.

Press once and move the cursor to the next value.

13.

Repeat steps 11 and 12 to enter all of the digits of the

Process Adjustment

, and then press

14.

Press the

button.

15.

Press

until

>Color Reg Chart

appears, and then press

The color registration chart is printed with the new values.

16.

Press

17.

Adjust till all straight lines are at the value of 0. Viewing the images before and after will help.

From Your Computer

Using the Tool Box, enter the values that you found in the color registration chart to make adjustments.

Click

start

All Programs

Dell Printers

Additional Color Laser Software

Quick Launch Utility.

The

Quick Launch Utility

dialog box opens.

Click the

Tool Box

button.

The

Tool Box

dialog box opens.

Select the printer from

Printer Name

The

Tool Box

opens.

Summary of Contents for 2135 Color Laser





































































































































































































































































Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands

Dell 2135 Color Laser, Troubleshooting Manual

Search results

Summary of Contents for 2135 Color Laser

Reviews:

Related manuals for 2135 Color Laser

Brands by name

Popular brands