44
Device Set up
This menu allows you to select and configure the HDD and PTZ camera (not included).
HDD Tab
This menu option gives you information about your Hard Disk Drive (HDD), allows you to enable overwrite
mode, and format the hard drive and/or USB drive.
Your options are:
State:
Displays the current operating status of the
hard drive. If the hard drive is functioning normally it
will display OK.
Avail/Total:
Tells you how much HDD space that
you have in total and is still available to record.
Avail Time:
Amount of remaining time available
to record.
Select:
Select which HDD to modify.
Overwrite
When the overwrite mode is enabled, the DVR will record over the oldest footage once the HDD is full,
instead of stopping the recording once it is full. Overwriting allows the DVR to never stop recording. If you
want to stop recording once the HDD is full, set overwrite to DISABLE. To ENABLE/DISABLE/OVERWRITE follow
these steps:
1. Select the drop down menu beside OVERWRITE.
2. Select AUTO to turn overwrite on, you can also
set the DVR to overwrite after just a few hours or
days, or choose DISABLE to turn overwrite off.
3. Select APPLY to save settings.
DEVICE SETUP
