manualshive.com logo in svg

Defender 21000 Series, User Manual

Share
Download
Defender 21000 Series User Manual Download Page 13

13

CONNECTING ADDITIONAL DEVICES 
Connecting a USB Mouse

1.  Plug the USB connection on the mouse into the 

top USB connection on the back of the DVR.

Connecting a Monitor

1.  Connect the BNC to RCA connector to the top 

VIDEO OUT connection on the back of the DVR.

2.  Plug the RCA cable into the BNC connector.
3.  Attach the other end of the RCA cable to a 

yellow RCA video input on your TV/monitor.

4.  Switch the TV/Monitor source to view the DVR. 

(Consult the TV/Monitor manual for instructions 
on how to switch the video source).

5.  The bottom video out is for a second monitor. 

Plugging an RCA cable into this video out would 
be the same as plugging it into the top  
video output. 

NOTE:  

HDMI input on the DVR only supports 1920X1024. Ensure 

you monitor can support this settings when connecting to an 

HD monitor.

POWERING ON DVR

1.  Plug the power cord into a power outlet (surge 

protected power outlet recommended).

2.  Insert the small end of the power supply wire 

into the rear DC 12V port on the DVR.
•  After a few seconds the splash screen will 

appear and the DVR will start up.

BUTTONS AND CONNECTIONS

Summary of Contents for 21000 Series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands