48
DST (Daylight Saving Time)
You can program the DVR to automatically switch to Daylight Saving Time. To customize the DVR’s daylight
saving time settings follow these steps:
1. Select the SETUP button next to DST.
2. Select the drop down box next to DAYLIGHT
SAVING TIME MODE and list will appear.
Select ENABLE.
3. Select the drop down box next to Time Offset
and select if you would like your clock to go
forwards or backwards by 1 hour or 2 hours.
4. Select the drop down box next to DAYLIGHT
SAVING TIME MODE to adjust whether you
would like DST to change in a specific week or a
specific date.
By Week
1. Select the drop down box next to DAYLIGHT
SAVING TIME MODE and select WEEK.
2. Select the drop down box next to Start Time and
select the month.
3. Select the drop down box below and select
the week.
4. Select the drop down box below and select the
weekday.
5. Select the box below and input the time for DST
to take effect. Select the ENTER key.
6. Repeat steps above for End Time.
By Date
1. Select the drop down box next to DAYLIGHT
SAVING TIME MODE and select DATE.
2. Select the box next to Start Time and a keyboard
will appear. Input the specific date.
3. Select the box below and input the time for DST
to take effect. Select the ENTER key.
4. Repeat steps above for End Time.
5. Once your parameters have been set, select
APPLY to save your settings.
DEVICE SETUP