23
Record Setup
This option allows you to turn recording for each camera on or off, set video quality, adjust the frame rate,
set the resolution, enable or disable audio recording, pick a recording mode (scheduled or continuous),
set the file pack time (recorded video size in minutes) and copy settings from one camera to another.
Rec Para Tab
Recording parameters allows you to choose the channel you wish to record, turn record on or off, set the
Pack Duration as well as enable PRERECORD if you wish to enable Motion Record.
Record (Enable/Disable)
1. Select the drop down menu beside the
channel(s) you would like adjusted.
2. Highlight whether you would like the camera
enabled or disabled and press SELECT.
3. Select APPLY to save settings.
Copy settings
1. Select the channel at the bottom of the page
that you wish to copy.
2. Select which channels you would like to apply
the settings to.
3. Select COPY, then select APPLY to save settings.
Pack Duration
The DVR allows you to choose the maximum length that each recorded video clip will be. This is for
backup purposes. To adjust and/or set a pack time follow these steps:
1. Select the drop down menu beside PACK TIME.
2. Highlight the time you would like each recorded
video clip to be (15, 30, 45 and/or 60 min) and
press SELECT.
3. Select APPLY to save settings.
PreRecord
This function works with motion detection. If enabled the DVR will pull footage prior to motion being
detected for that camera.
1. Select the drop down menu beside PRERECORD.
2. Select ENABLE or DISABLE.
3. Select APPLY to save settings.
BASIC SETUP
