46
PTZ Tab
PTZ setup allows you to input information for a PTZ camera (PTZ cameras not included). The information
must be entered into the DVR so that the DVR works with your PTZ camera and all its functions.
Connecting a PTZ Camera
The DVR supports a 2-wire RS-485 connection for a PTZ camera to be connected (PTZ camera not
included).Please see your PTZ camera manual for further instructions on required connections and settings.
To connect a two-wire PTZ camera, follow these steps:
1. With a small flat head screwdriver, unscrew the
screw on the top of the opening.
2. Insert the wire into the hole below the top screw
while it is still unscrewed.
3. Re-tighten the top screw, to lock the wire into place.
Pull lightly on the wire to make sure it is secure.
4. For further instruction on connecting your PTZ
camera, please see the PTZ camera’s
instruction manual.
1.
2.
3.
To input the PTZ information:
1. Find which camera channel the PTZ camera(s)
are hooked up to on the PTZ setup menu. On
that channel's row input the proper information
for your PTZ camera.
2. The information you need to select will be
specified in the PTZ manufacturer's manual.
3. Choose to enable/disable CRUISE MODE
for the PTZ camera, once all the correct
information is entered into the DVR, select
APPLY to save changes.
SYSTEM Setup
This menu option allows you to change system settings on your DVR. The settings you can change include:
Date and Time:
Adjust date, time and daylight
saving time
Password:
Turn the password function on/off as well
as change the password
Language:
Customize and set different languages
Info:
Gives you information about the device,
software version, and the MAC address
Users:
Add different users, set different administrators
DEVICE SETUP
