manualshive.com logo in svg

Defender 21000 Series, User Manual

Share
Download
Defender 21000 Series User Manual Download Page 73

73

Advanced

Adjust the device alarms for disk errors, video loss, or when your HDD is full. 

Events

To enable alarm settings: 

1.  Select the drop down menus to select whether 

the DVR alarm will sound when the HDD is low 
on memory or is not working properly or if there 
is video loss.

2.  Select the ENABLE checkbox to turn on the 

alarm for the specific issue. 

3.  Select the drop down box next to BUZZER to 

select the buzzer length.

4.  Select the SHOW MESSAGE checkbox if you 

would like a message to be displayed on your 
monitor when motion has been detected.

5.  Select the SEND EMAIL checkbox if you would 

like an email alert when motion is detected. You 
must have email notification set up to  
receive alerts.

6.  Select SAVE to save settings. 

Maintain

To turn auto maintenance on or off: 

1.   Select MAINTAIN.
2.  Select the drop down box next to AUTO REBOOT 

and select ENABLE or DISABLE. 

3.  Input the date and time with the drop down 

boxes when you would like the reboot  
to happen.

4.  Select SAVE to save your changes.

ONLINE SOFTWARE

Summary of Contents for 21000 Series
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands