33
Gateway
This is the IP address of your router. If the box is populated with numbers other than all zeros, this is a
confirmation that you are connected to the router. (example: 192.168.1.1)
DNS1 and DNS2
Stands for Domain Name System and is for advanced network setup. DNS is used to convert common
names into website IP Addresses. It is best to leave these settings as it is usually the same as the router. To
Change the DNS address follow these steps:
1. Highlight and select the starting number next to
DNS and a keyboard will appear.
2. Type the number you would like for a DNS
address then select the ENTER key.
3. Select APPLY to save your changes.
UPNP
Universal Plug and Play, not applicable.
Substream Tab
These are the resolution settings for viewing your mobile device.
Video
Enable or disable if the video from that channel can be viewed from a mobile device.
Frames Per Second (FPS)
The FPS settings are adjustable. A higher FPS will result in smoother and better quality recorded video. A
lower FPS will result in a choppy video, however it will use less space on the HDD. To adjust the frame rate of
video, follow these steps:
1. Find the channel that you wish to adjust the FPS.
2. Scroll through the list (1 to 30) and the FPS you
wish to record on that channel.
3. Select APPLY to save your settings.
Bitrate
The bitrate represents the amount of information or detail that is stored per unit of time of a recording. The
DVR is set to the recommended 128bps.
Audio
1. Check the AUDIO BOX next to the channel you
want audio enabled. (Your camera must have
audio recording capabilities.)
2. Uncheck the AUDIO BOX next to the channel
you want audio disabled.
3. Select APPLY to save settings.
NETWORK SETUP
