DayStar Digital TURBO 040, User Manual

Page: 59 / 132

4 While gently pressing the sides inward, slow­
ly slide the tool until the teeth of the tool are
firmly seated under the lip of the CPU.
Figure 35
-
Inner tool over processor
5. Place the outer tool at a 90 degree angle over
the inner tool. The tool should rest on the
motherboard and not on any other chips.
Start turning the w in g nut onto the thread­
ed piece.
Figure 36
-
Outer tool over processor
CHAPTER 4
Installing The Turbo 040
-
Macintosh IIx