DayStar Digital TURBO 040, User Manual

Page: 118 / 132

Control Panel
and
Extension
conflicts
1. Remove all third party Control Panel and
Extension files from the hard disk ’ s System
Folder.
2. Restart the M acintosh from the hard disk.
(If the M acintosh does not start up properly
at this point, it is probably due to a contam ­
inated System Folder. See “System software
contam ination”, page 117.)
3. Starting w ith the QuadControl file,
reinstall the Control Panel and Extension
files into the System Folder one at a time.
Restart the m achine after adding each file
until you encounter the problem. After this
happens, restart from a floppy disk (or hold
dow n the shift key at boot-up if using
System 7) and remove the last file loaded.
Proceed again with this systematic check
until you have removed all conflicts.
NOTE:
Som e conflicts can be overcom e by
changing the first character of the trouble­
som e file ’
s name. Since these files load
alphabetically, this will also alter their load­
ing order.
It is also possible that the troublesom e file is
not ’
040 compatible. Contact the author for
the latest version.
NOTE:
If you have a National Instruments
GPIB board, you must use NB Handler
Control Panel version 4.3 or higher.
1 1 6
C HAP T E R 9
I n s t a llin g T h e T u rbo 040 S oftw are