DayStar Digital TURBO 040, User Manual

Page: 48 / 132

NOTE:
You should
only feel
light to medi­
um resistance
when
installing the
adapter. If
you have to
push with
extreme force,
the pins have
not been
properly
aligned and
will bend.
Installing the
D ay Star
Turbo 040
Turbo 040 installs
at a 45° angle to
the motherboard
4. Gently press above the center of the socket
connections on the adapter board until it is
fully seated.
Figure 24a - Press on center o f socket connections
5. Position the Turbo 040 card with the
included adapter board so that the Turbo
040 is face up and the connector is toward
the front of the machine. Squeeze the con ­
nectors together with both hands until the
board is fully seated.
Figure 25 - Install Turbo 040
Installation of the Turbo 040 is complete. You
must now test the installation and install the
software.
4 6
C H A P T E R 3
Installing The Turbo 040 - Macintosh II