DayStar Digital TURBO 040, User Manual

Page: 60 / 132

6. W hile m aintaining gentle pressure on the
sides of the inner tool, slow ly turn the w in g
nut clockwise. This will lift the CPU from
its socket evenly.
Figure 37 - Removing the processor
Preparing the
Turbo 040
NOTE:
The adapter
IIx must be
part W00339.
Earlier
models do
not support
the Turbo
040. Contact
DayStar
Customer
Service if you
need to
exchange
adapters.
7. Once removed, install the CPU into the
adapter socket. Align pin 1 on the CPU (gold
Y-line) with pin 1 of the socket (white trian­
gle). To protect the adapter’
s pins, the instal­
lation should be done on the edge of a flat
surface, with the pins over hanging as shown.
Figure 38
-
Installing motherboard CPU onto adapter
58
C H A P T E R 4
Installing The Turbo 040 - Macintosh IIx