DayStar Digital TURBO 040, User Manual

Page: 78 / 132

Testing the
installation
Please read all of this section before you
test the installation.
Plug the power cord into the back of the
M acintosh Ilex. Turn the M acintosh on. You
should hear the custom ary “BONG”. If you do
not hear the “BONG”, go to the next page.
YES! I hear the “BONG”.
1. Turn the power off and remove the power
cord from the Mac.
2. Replace the case cover and screw. Attach all
cables you have removed. Now you are
ready to install the software. Please go to
Chapter 9, “Installing the Turbo 040
Software.”
NO! I DO NOT hear the “BONG” .
There is no response w hen the M acintosh Ilex
is turned on.
or
A different sound (the failure tone) is heard
w hen power is turned on.
If you experience any of the above, remove the
power cord from the back of the Mac Ilex.
Then, do the following:
1. Review the instructions and verify proper
installation. Then,
• Squeeze the Turbo 040 and adapter board
together.
• Remove the power supply.
76 C H A P T E R S
Installing The Turbo 040- Macintosh Ilex