DayStar Digital TURBO 040, User Manual

Page: 99 / 132

Cache Slot
Figure 67 - Installing the Turbo 040
You have installed the Turbo 040. Make sure all
Testing the
connections are tight. You must now test the
installation
installation and install the software.
Please read all of this section before you
test the installation.
Plug the power cord into the back of the
Macintosh. Turn the M acintosh on. You should
hear the custom ary “BONG”. If you do not hear
the “BONG”, go to the next page.
YES! I hear the “BONG”
1. Turn the power off and remove the power
cord from the Mac.
2. Replace the case cover and screw. Attach all
cables you have removed. Now you are
ready to install the software. Please go to
Chapter 9 in the Turbo 040 manual,
“Installing the Turbo 040 Software.”
CHAPTER 8
In sta llin g The Turbo 040 - M acin tosh Ilci