DayStar Digital TURBO 040, User Manual

Page: 85 / 132

1. (Adapter Ilsi - NuBus only-)
Place the metal
shield flat on your work surface with the four
screw holes facing up. Position the adapter
board over the four screw sockets with the slots
facing up. The board only fits one way.
2.
(Adapter Ilsi - NuBus only-) Place the four
nylon washers on the Phillips head screws
and
insert the screws through the board and
into the shield’ s built-in nuts. Tighten the
screws until you receive medium resistance
and the board is firmly attached to the shield
Figure 59 - Attaching the adapter to the metal shield
1. If you are installing a PDS or NuBus
board, align it
with the top slot. Squeeze the
connectors together with both hands until
the board is fully seated. Note: The Turbo 040
will ignore math chips on any other cards.
Figure 60
-
Attaching a PDS or NuBus card
Installing the
m etal shield
(Adapter Ilsi -
NuBus only)
4 Phillips head
screws
Installing an
additional
PDS or NuBus
card
Warning:
DO NOT plug
any PDS
boards into
the board’ s
center (cache)
connector or
Ilci cache
cards into the
top (PDS)
connector.
C H A P T E R 6
I n s t a llin g T h e T u rbo 040- M a cin tosh Ilsi
83