DayStar Digital TURBO 040, User Manual

Page: 87 / 132

4. (Adapter Ilsi - NuBus only-) Take the two
thumb screws (with the large heads)
and insert them
through the back of the
Macintosh chassis and into the NuBus
A dapter’
s metal shield.
Figure 63
-
Installing the thumb screws
Installation of the Turbo 040 assem bly is now
complete. You are ready to proceed with test­
ing and software installation.
Check that all connections are tight. You are
Testing the
now ready to test the installation.
installation
Please read all of this section before you
test the installation.
Plug the power cord into the back of the
Macintosh. Turn the M acintosh on. You should
hear the custom ary “BONG”. If you do not hear
the “BONG”, go to the next page.
YES! I hear the “BONG”
1. Turn the power off and remove the power
cord from the Mac.
C H A P T E R 6
Installing The Turbo 040- Macintosh Ilsi