Datalogic AV500, Product Reference Manual

Page: 32 / 324

INTRODUCTION
12
AV500 2D CAMERA
X-PRESS FUNCTIONALITY
X ‐ PRESS is the intuitive Human Machine Interface designed to improve ease of installa ‐
tion and maintenance. Status information is clearly presented by means of the five col ‐
ored LEDs, and a single push button gives immediate access to the following relevant
functions:
• Test with bar graph visualization to check static reading performance
• Focus/Locate the Focus LED will blink.
• Setup to perform Exposure Time and Gain calibration.
• Learn to self ‐ detect and auto ‐ configure for reading unknown codes
1 – Press the button (the Status LED will give a visual feedback).
2 – Hold the button until the specific function LED is on (Test, Focus, Setup or Learn).
3 – Release the button to enter the specific function.
Once in a mode, if you press and hold the button again, it will exit and discard any data
from that mode and continue the scrolling sequence to select a mode.
Once button is pressed, the cycle of LEDs activation is as follows:
If the Xpress web interface is active, the LEDs will flash four times indicating it is dis-
abling the active interface. The hardware interface returns to its initial state for regular
access.