Datalogic AV500, Product Reference Manual

Page: 71 / 324

CBX510 CONNECTION BOX
PRODUCT REFERENCE GUIDE
51
Sync In/Sync Out
If connecting several AV500s together, they may be connected via the Sync In and Sync
Out ports.
Host Net/Image Net
During initial setup, a PC (laptop) may be connected to the AV500 with an RJ45 cable.
Connect an Ethernet cable from the
HOST NET or IMAGE NET port of the AV500 to the
Ethernet port of your PC. For information on connecting to e ‐ Genius, see Chapter 4.
If you are terminating more than one wire in a single terminal, cut off any tinned ends and
twist the wires together before inserting them into the terminal.
Parameters for tunnel are set up in the Controller AV500 only. IP Address for Host Net and
Image Net are as follows:
Host Net: 192.168.3.10
Image Net: 10.0.40.20