Datalogic AV500, Product Reference Manual

Page: 298 / 324

AV500 CALIBRATION
278
AV500 2D CAMERA
8. Enter those measurements into the Far Measurements fields.
9. Click Next Steps >>.
10. Step 3/5: Near Distance Calibration Target Alignment appears:
11. Place a target at the minimum distance and measure X, Y, and Z references
•X is the distance from the side of the belt to the Calibration Target.
•Y is the distance from the Photo Sensor or Position Sensor, which ever is closer to the
camera, to the Calibration Target.
•Z is the distance from the conveyor surface to the Calibration Target. Z=0
12. Enter those measurements into the Near Measurements fields.
13. Click Next Steps >>.