Datalogic AV500 Product Reference Manual Download Page 272

Page: 272 / 324

E-GENIUS

252

AV500 2D CAMERA

Utilities | Download Tools

The

Download Tools

window provides links to tools stored on the AV500 that can be

used for calibrating and testing the camera system. These include printable calibration

targets and other helpful items. The items available may change depending on the cam

‐

era version.

To view the available tool links:

1. In the menu tree under

Utilities

, click

Download Tools

. The

Download Tools

win

‐

dow opens.

2. Click on a link to download the indicated tool to your computer.

Live Image Viewer

1. Click

Live Image Viewer

to download the tool. Extract the tool to your desired

location.

2. Click on the exe to open. The following window opens.

Summary of Contents for AV500





































































































































































































































































































































Search results

Summary of Contents for AV500

Reviews:

Related manuals for AV500

Brands by name

Popular brands

Datalogic AV500, Product Reference Manual

Search results

Summary of Contents for AV500

Reviews:

Related manuals for AV500

Brands by name

Popular brands