Datalogic AV500, Product Reference Manual

Page: 121 / 324

OPERATING MODE
PRODUCT REFERENCE GUIDE
101
Green Spot Settings
Green Spot Mode
Select one of the following from the drop ‐ down lists:
•Disabled
•
Good Read - Immediate:
this option will light the green LED at the time of the bar code
being decode. In an array only the AV500 that read the bar code will light
•
Good Read - Host Transmission:
this option will light the green LED when the package
reaches the transmit point. In the on ‐ line mode it will light when the trailing edge of the
package leaves the trigger photo sensor. In the Packtrack mode it will light when the defined
edge of the package, leading or trailing, arrives at the Distance To Transmit Point setting.
Green Spot On Time
Specify the amount of time is milliseconds that the Green Spot should remain on.
Illumination Off While Green Spot On
Click the check ‐ box to turn of Illumination while Green Spot is on. This may help you use Green
Spot to line up the AV500.
Redundant Controller Settings
Controller Mode: Camera_1
Select one of the following from the drop ‐ down list:
•
Auto-Detect:
this option is used when a CBX is used in the array. All AV500 units in the
array will check the status of the bit created by the IDNet jumper. The one that identifies the
connection will become the controller.
•Primary Controller:
•Secondary Controller:
Tunnel Software Update
Allow automatic software updates
Select the check box to enable all cameras in the tunnel to automatically update when
software is loaded to one of the cameras.
3. When you have finished making changes, click Update to save or click Reset to
revert to the previously saved values.