Datalogic AV500 Product Reference Manual Download Page 99

Page: 99 / 324

SYSTEM INFO

PRODUCT REFERENCE GUIDE

Camera Statistics

Belt Speed

Displays the speed of the conveyor belt in millimeters per second.

Encoder Frequency

Displays the encoder frequency.

Statistics Elapsed Time

Displays the amount of time

elapsed from the last reset or the last modification to the configuration

of the system for which

the unit has been collecting statistics.

This is reset at startup and when the

“Reset Counts” button is clicked.

Total Packages

The total number of packages detected by the presence sensor, including errors.

Valid Reads

Number of labels completely read by the system (the same label may include more than one barcode).

No Reads

The total number of unsuccessful code reads for the camera.

Multiple Reads

The total number of times the same bar code has been read by the camera.

Summary of Contents for AV500





































































































































































































































































































































Search results

Summary of Contents for AV500

Reviews:

Related manuals for AV500

Brands by name

Popular brands

Datalogic AV500, Product Reference Manual

Search results

Summary of Contents for AV500

Reviews:

Related manuals for AV500

Brands by name

Popular brands