Datalogic AV500, Product Reference Manual

Page: 161 / 324

PRODUCT REFERENCE GUIDE
141
Advanced Decode
Advanced Decode provides ways to improve read rate, by setting filters or more precise
parameters, however these settings often affect processing time. When you set
Advanced Decode parameters there is a fine balance between reading performance and
processing time. Use Advanced Decode options with caution.
To edit the Advanced Decode Settings:
1. In the menu tree under Modify Settings, navigate to Global Settings | Advanced
Decode. The Advanced Decode window opens.
2. Enter the appropriate information in the form as described below:
Min distance between frames in a trigger (For PackTrack only)
Enter the minimum distance between frames required per trigger cycle.
Max frames per trigger (0=unlimited) (For Online only)
Enter the maximum number of frames the AV500 can process per trigger. (a value of 0 will
allow the AV500 to collect up to the maximum number). To limit the number of frames to less
than 64, enter a value between 1 and 63.
Filter Overlapping Duplicate Codes
Select the Check box to enable the camera to filter out duplicates where the bounding boxes
overlap.
Enable Low Profile 1D Codes
Select the check box to enable reading of low profile 1D barcodes.
Enable Low Contrast Improvements
Select the check box to enable automatic contrast improvements.
It is best to use Advanced Decode only when necessary and under the guidance of Data-
logic Tech Support.
This option may increase processing time which may create no reads