Datalogic AV500, Product Reference Manual

Page: 101 / 324

SYSTEM INFO
PRODUCT REFERENCE GUIDE
81
No Read
Increases when none of the barcodes programmed in the related “Group Label” setting is read.
Decoder Details
Online Indicator
Green = Online (connected and recognized in the cluster)
Gray = Unit not connected (unit not seen by master)
Yellow = Online, but not assigned to the cluster (shown under Cameras not in this Cluster)
Red = Offline
Status Indicator
Green = Online (connected and recognized in the cluster)
Gray = Unit not connected (unit not seen by master)
Yellow = Online, but not assigned to the cluster (shown under Cameras not in this Cluster)
Red = Offline
IP Address
The Internet Protocol address (IP address) is a numerical label assigned to the device
connected to a computer network that uses the Internet Protocol for communication.[1][2] An
IP address serves two principal functions: host or network interface identification and location
addressing.
MAC Address
A media access control address (MAC address) of a device is a unique identifier assigned to a
network interface controller (NIC) for communications at the data link layer of a network
segment.
Software Type
Describes the type of software on the device. Typically this will indicate STANDARD or a
customer name if your software is custom.
Software Version
Identifies the version number of the software
PCIe Drive Version
Peripheral Component Interconnect Express, better known as PCI Express (and abbreviated
PCIe) is a computer expansion card standard used in motherboard
‐ level connections and as an
expansion card interface.
Decoder Name
Identifies the type of decoder. For example, BLR_VL5.10.56R_LNX or EVL 1.1.24.2 (VL
VL5.11.00U.50331646.10)
Controller Mode
Displays the mode of the camera; Active Controller, Backup Controller or Client.
Host Port IP Address
The Internet Protocol address (IP address) of the host port.
Image Port IP Address
The Internet Protocol address (IP address) of the image port.
Configuration Update Count
The number of times the configuration file has been updated.
Diagnostic Messages
Displays any diagnostic messages that apply. Click on Diagnostics Messages to access the
complete list of possible messages.
Real Time Processor Details
Online Indicator
Datalogic Technical Support will use these Diagnostic messages to properly diagnose and
troubleshoot your AV500.