Datalogic AV500, Product Reference Manual

Page: 139 / 324

PRODUCT REFERENCE GUIDE
119
Barcode Configuration allows you to set up what will be transmitted once barcodes are
read (or not read).
For our examples, four bar codes have been enabled; Postal codes, Code 128, Inter ‐
leaved 2of 5, and UPC ‐ A
Single Label - Local No Read
In Single Label mode only one barcode can be read in each reading phase; however it is
determined automatically from up to 10 enabled codes. The barcode reader stops
decoding as soon as a code is read. If a code is not read during the reading phase, the No
Read message is produced.
Local No Read Message specifies that a No Read String is defined in the Barcode Settings
Table for each of the four bar codes.
As parcels pass under the reader, the first code decoded is transmitted:
#STX 675898767566 #CR#LF
If none of the barcodes are read then a single no read message is transmitted:
#STX ??????? #CR#LF