Datalogic AV500, Product Reference Manual

Page: 16 / 324

COMPLIANCE
xvi
AV500 2D CAMERA
Power Supply
This product is intended to be installed by Qualified Personnel only.
This product is intended to be supplied with a UL listed or CSA Certified LPS Power unit
of 24 volt, 2 amp minimum (24 VDC Nominal, +/
‐ 20%).
CE Compliance
CE marking states the compliance of the product with essential requirements listed in
the applicable European directive. Since the directives and applicable standards are
subject to continuous updates, and since Datalogic promptly adopts these updates,
therefore the EU declaration of conformity is a living document. The EU declaration of
conformity is available for competent authorities and customers through Datalogic
commercial reference contacts. Since April 20th, 2016 the main European directives
applicable to Datalogic products require inclusion of an adequate analysis and assess
‐
ment of the risk(s). This evaluation was carried out in relation to the applicable points of
the standards listed in the Declaration of Conformity. Datalogic products are mainly
designed for integration purposes into more complex systems. For this reason it is under
the responsibility of the system integrator to do a new risk assessment regarding the
final installation.
Customs Union:
The CU Conformity certification has been achieved; this allows the Product to bear the
Eurasian Mark of conformity.
FCC Compliance
Modifications or changes to this equipment without the expressed written approval of
Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the follow ‐
ing two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference which may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea
‐
sonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio fre
‐
quency energy and, if not installed and used in accordance with the instruction manual,