26-35 Terminal X42/5 High Ref./feedb. Value
Range:
Function:
100.000
Unit
*
[Par. 26-34 -
1000000.000]
Enter the analog input scaling value that corresponds to the high
voltage value set in par 26-21.
26-36 Terminal X42/5 Filter Time Constant
Range:
Function:
0.001 s
*
[0.001 - 10.000 s]
Enter the time constant. This is a first-order digital low pass filter
time constant for suppressing noise in terminal X42/5. A high
time constant value improves dampening but also increases the
time delay through the filter. This parameter cannot be adjusted
while the motor is running.
26-37 Terminal X42/5 Live Zero
Option:
Function:
[0]
Disabled
[1]
Enabled
This parameter makes it possible to enable the Live Zero mon-
itoring. E.g. where the analog input is a part of the frequency
converter control, rather than being used as part of a decentral
I/O system, such as a Building Management System.
26-40 Terminal X42/7 Output
Option:
Function:
Set the function of terminal X42/7 as an analog current output.
[0]
No operation
[100]
Output frequency
[101]
Reference
[102]
Feedback
[103]
Motor current
[104]
Torque rel to lim.
[105]
Torque rel to rated
[106]
Power
[107]
Speed
[108]
Torque
[113]
Ext. Closed Loop 1
[114]
Ext. Closed Loop 2
[115]
Ext. Closed Loop 3
[139]
Bus ctrl.
[141]
Bus ctrl timeout
26-41 Terminal X42/7 Output Min. Scale
Range:
Function:
0%
*
[0.00 - 200%]
Scale the minimum output of the selected analog signal at ter-
VLT
®
AQUA Drive Programming Guide
2. Parameter Description
MG.20.O2.02 - VLT
®
is a registered Danfoss trademark
249
2