Daikin FTKS50BVMB, Service Manual

Page: 337 / 456

SiEN18-622 Troubleshooting for RA Indoor Unit
Troubleshooting 325
4.3 Fan Motor or Related Abnormality
4.3.1 AC Motor (Wall 20~35 C series, Duct, Floor / Ceiling)
Remote Control
Display
A6
Method of
Malfunction
Detection
The rotation speed detected by the Hall IC during fan motor operation is used to determine
abnormal fan motor operation.
Malfunction
Decision
Conditions
When the detected rotation speed is less than 50% of the HH tap under maximum fan motor
rotation demand.
Supposed
Causes „
Operation halt due to short circuit inside the fan motor winding.
„
Operation halt due to breaking of wire inside the fan motor.
„ Operation halt due to breaking of the fan motor lead wires.
„
Operation halt due to faulty capacitor of the fan motor.
„ Detection error due to faulty control PCB.
Troubleshooting
Check No.16
Refer to P.332
Rotate the fan by hand.
Check No. 16
Check Hall IC
Operate the fan.
Does it rotate?
Does it rotate smoothly?
Is there an output?
Is there conductivity?
Check the capacitor's
conductivity
Check the fan motor voltage.
(immediately after re-start)
Check the fan motor voltage.
NO
NO
NO
NO
NO
(R3219)
Caution
Be sure to turn off power switch before connect or disconnect connector,
or parts damage may be occurred.
YES
YES
YES
YES
YES
YES
NO
Replace the fan motor or control
PCB.
Replace the fan motor
Replace control PCB.
Replace the fan motor.
Replace the control PCB.
Replace the capacitor.
(Replace the control PCB.)
Replace the fan motor.