![background image](http://html1.mh-extra.com/html/daikin/ftks50bvmb/ftks50bvmb_service-manual_501473232.webp)
Instruction
SiEN18-622
220
System Configuration
2.2.7 POWERFUL Operation
NOTE
POWERFUL operation quickly maximizes the cooling (heating) effect in
any operation mode. You can get the maximum capacity.
To start POWERFUL operation
1. Press “POWERFUL button”.
•
POWERFUL operation ends in 20
minutes. Then the system automatically
operates again with the settings which
were used before POWERFUL
operation.
•
When using POWERFUL operation,
there are some functions which are not
available.
•
“
” is displayed on the LCD
To cancel POWERFUL operation
2. Press “POWERFUL button” again.
•
“
” disappears from the LCD.
Notes on POWERFUL operation
•
POWERFUL Operation cannot be used together with ECONO or SILENT Operation.
After-press priority is given.
•
POWERFUL Operation can only be set when the unit is running. Pressing the operation stop button causes the settings
to be canceled, and the “
” disappears from the LCD.
•
In COOL and HEAT mode
To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased and the air flow rate be fixed to
the maximum setting. The temperature and air flow settings are not variable.
•
In DRY mode
The temperature setting is lowered by 2.5°C and the air flow rate is slightly increased.
•
In FAN mode
The air flow rate is fixed to the maximum setting.
•
When using priority-room setting
See “Note for multi system”.
Summary of Contents for FTKS50BVMB
