xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Figure 2- 86. sFlow Sampler Add window
The following fields may be set:
Parameter Description
Unit
Select the unit to configure.
From/To
Choose the beginning and ending range of ports to be configured for packet sampling.
Analyzer Server ID
(1-4)
Enter the previously configured Analyzer Server ID to state the device that will be receiving
datagrams from the Switch. These datagrams will include the sample packet information taken
using the sampling mechanism configured here.
RX Rate (0-65535)
Users can set the rate of packet sampling here. The value entered here is to be multiplied by
256 to get the percentage of packets sampled. For example, if the user enters a figure of 20
into this field, the switch will sample one out of every 5120 packets (20 x 256 = 5120) that pass
through the individual port. Users may enter a value between
1
and
65535
. An entry of
0
disables the packet sampling. Since this is the default setting, users are reminded to configure
a rate here. Otherwise, this function will not work.
TX Rate (0-65535)
Users can set the rate of packet sampling here. The value entered here is to be multiplied by
256 to get the percentage of packets sampled. For example, if the user enters a figure of 20
into this field, the switch will sample one out of every 5120 packets (20 x 256 = 5120) that pass
through the individual port. Users may enter a value between
1
and
65535
. An entry of
0
disables the packet sampling. Since this is the default setting, users are reminded to configure
a rate here. Otherwise, this function will not work.
Max Header Size
(18-256)
This field will set the number of leading bytes of the sampled packet header. This sampled
header will be encapsulated with the datagram to be forwarded to the Analyzer Server. The
user may set a value between
18
and
256
bytes. The default setting is
128
bytes.
Click
Apply
to implement the changes made.
77
