xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Host (0-50)
allowed on each port at the same time.
Aging Time
(1-1440 min)
This parameter specifies the period of time a host will keep in authenticated state after it
successes to authenticate. Enter a value between
1
and
1440
minutes. The default setting is
1440
minutes. To maintain a constant Port Configuration, tick the Infinite check box.
Idle Time
(1-1440 min)
This parameter specifies the period of time during which there is no traffic for an
authenticated host and the host will be moved back to the unauthenticated state. Enter a
value between
1
and
1440
minutes. A value of Infinite indicates the Idle state of the
authenticated host on the port will never be checked. The default setting is Infinite.
Block Time
(0-300 sec)
This parameter specifies the period of time a host will keep in a blocked state after it fails to
authenticate. Enter a value between
0
and
300
seconds. The default setting is
60
seconds.
Click
Apply
to implement changes made.
JWAC User Account
This window is used to configure JWAC user accounts on the Switch.
To view this window, click
Security > Japanese Web-based Access Control (JWAC) > JWAC User Account
, as shown
below:
Figure 7- 82. JWAC User Account window
To configure JWAC user settings, click the
Add
button, which will open the following window:
Figure 7- 83. Create a New JWAC User Account window
The following fields can be configured:
Parameter Description
User Name
Enter a username of up to 15 alphanumeric characters.
VID(1-4094)
Enter the VLAN ID of the Account you wish to create.
412
