![D-Link xStack DGS-3612G series Reference Manual Download Page 141](http://html1.mh-extra.com/html/d-link/xstack-dgs-3612g-series/xstack-dgs-3612g-series_reference-manual_3521854141.webp)
xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Limited Multicast Address Range Settings
This
window allows the user to specify which
multicast address(es) reports are to be received on
specified ports on the Switch. This function will
therefore limit the number of reports received and the
number of multicast groups configured on the Switch.
The user may set an IP address or range of IP
addresses, by entering a pre-configured Range Name
,
to accept reports (
Permit
) or deny reports (
Deny
)
coming into the specified switch ports.
To view this window, click
L2 Features >
IGMP
Snooping
>
Limited Multicast Address Range
Settings
, as shown.
To configure Limited IP Multicast Range:
Use the remaining pull-down menus to configure the
parameters described below:
Parameter Description
Limited IP Multicast Address Range Port
Settings (Click Apply to save changes)
Unit
Enter the unit you wish to configure.
From/To
Select a range of ports to be
granted access or denied access
from receiving multicast information.
Access
Toggle the Access
field to either
Permit
or
Deny
to limit or grant
access to a specified range of
Multicast addresses on a particular
port or range of ports.
Figure 3- 43. Limited IP Multicast Address Range Port Settings window
Limited IP Multicast Address Range
Settings
From/To
Select a port or range of ports to be
allowed access to multicast
information from a specific multicast
IP range.
Users may view the Limited Multicast IP Range settings on a port-
by-port basis using the pull-down menus under Limited IP Multicast
Address Range Table by Port.
Configured entries will be displayed in
the Limited IP Multicast Address Range Port Table at the bottom of
the window.
Enter the pre-configured Range
Name denoting a range of multicast
IP addresses for the ports listed in
the previous fields.
Range
Name
Click this button to add the Range
Name to these ports.
Add
Click this button to delete this range
name from the list of ports.
Delete
Delete
All
Click this button to delete all
configured range names from the
list of ports.
125