xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
2.
To make the subnet VLAN work well, users must add the ingress port to the VLAN member ports.
3.
The subnet VLAN may affect the authorization protocol, such as 802.1X, WAC, JWAC, MAC-based access control, and
compound authentication. Since the authorized port will be assigned to target VLANs and set its PVID to the target
VLAN ID, if the subnet VLAN takes effect, the ingress packets on this port may not be classified to target VLANs and
may cause the authorization protocol to work less efficiently.
Subnet VLAN Settings
To view this window, click
L2 Features > VLAN > Subnet VLAN > Subnet VLAN Settings
, as shown below:
Figure 3- 20. Subnet VLAN Settings window
Parameter Description
Action
Use the pull-down menu to
Add
,
Delete
or
Find
the subnet VLAN.
VLAN
Use the pull-down menu to select
VLAN Name
or
VID
to enter in the field next to it.
Network Address
Use the pull-down menu to select
IPv4 Address
or
IPv6 Address
to enter in the field next to it.
Priority
Use the pull-down menu to select priority
0
to
7
.
Click
Apply
to implement the changes. Click
View All
to see all the entries. Click
Delete All
to remove all the entries.
107
