xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Static ARP Settings
Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. This table allows
network managers to view, define, modify and delete ARP information for specific devices.
Static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and is used to
translate IP address to MAC addresses.
To open the
Static ARP Settings
window, click
L3 Features
>
Static ARP Settings
, as shown below:
Figure 4- 18. Static ARP Settings window
To add a new entry, click the
Add
button, revealing the following screen to configure:
Figure 4- 19. Static ARP Settings – Add window
To modify a current entry, click the corresponding
Modify
button of the entry to be modified, revealing the following window to
configure:
Figure 4- 20. Static ARP Settings – Edit window
The following fields can be set or viewed:
Parameter Description
IP Address
The IP address of the ARP entry. This field cannot be edited in the
Static ARP Settings –
Edit
window.
MAC Address
The MAC address of the ARP entry.
After entering the IP Address and MAC Address of the Static ARP entry, click
Apply
to implement the new entry. To completely
clear the Static ARP Settings, click the
Clear All
button.
187
