manualshive.com logo in svg

D-Link xStack DGS-3612G series, Reference Manual

Share
Download
D-Link xStack DGS-3612G series Reference Manual Download Page 133

xStack

®

 DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch 

260

. 

Router Timeout (1-
16711450 sec) 

This is the maximum amount of time in seconds a router is kept in the forwarding table 
without receiving a membership report. The default is 

260

. 

Leave Timer (1-
16711450 sec) 

This specifies the maximum amount of time in seconds between the Switch receiving a 
leave group message from a host, and the Switch issuing a group membership query. If no 
response to the membership query is received before the Leave Timer

 

expires, the 

(multicast) forwarding entry for that host is deleted. The default setting is 

2

 seconds. 

Querier State 

Choose

 Enabled

 to enable transmitting IGMP Query packets or 

Disabled

 to disable. The 

default is 

Disabled

. 

Querier Router 
Behavior 

This read-only field describes the behavior of the router for sending query packets. 

Querier 

will denote that the router is sending out IGMP query packets. 

Non-Querier

 will denote that 

the router is not sending out IGMP query packets. This field will only read 

Querier

 when the 

Querier State and the State fields have been Enabled. 

State 

Select 

Enabled 

to implement IGMP Snooping. This field is 

Disabled 

by default. 

Fast Leave 

This parameter allows the user to enable the 

Fast Leave

 function. Enabled, this function will 

allow members of a multicast group to leave the group immediately (without the 
implementation of the Last Member Query Timer) when an IGMP Leave Report Packet is 
received by the Switch. The default is 

Disabled

. 

Report Suppression 

This parameter allows the user to enable the Report Suppression function. When IGMP 
report suppression is 

Enabled

, the Switch sends the first IGMP report from all hosts for a 

group to all the multicast routers. The Switch does not send the remaining IGMP reports for 
the group to the multicast routers. If the multicast router query includes requests only for 
IGMPv1 and IGMPv2 reports, the Switch forwards only the first IGMPv1 or IGMPv2 report 
from all hosts for a group to all the multicast routers. If the multicast router query also 
includes requests for IGMPv3 reports, the Switch forwards all IGMPv3 reports for a group to 
the multicast devices. The default is 

Disabled

. 

Click 

Apply

 to implement the new settings. Click the 

Show All IGMP Group Entries 

link to return to the

 IGMP Snooping 

Settings

 window. 

 

117

Summary of Contents for xStack DGS-3612G series



































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands