xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
OSPFv3 Interface Settings
This window is used to set up OSPFv3 interfaces. To change settings for an existing IP interface, click on the hyperlinked name of
the interface to see the configuration window for that interface.
To view the following window, click
L3 Features > OSPF > OSPFv3 > OSPFv3 Interface Settings
, as shown below:
Figure 4- 67. OSPFv3 Interface Table window
To search for an entry by interface name, click the
Find
button.
To display all OSPFv3 interface entries, click the
View All
button.
To configure the settings for a specifc entry, click the
Modify
button, which will give access to the following window:
Figure 4- 68. OSPFv3 Interface Settings - Edit window
Configure each IP interface individually using the
OSPFv3 Interface Settings - Edit
window. Click the
Apply
button when you
have entered the settings. The new configuration appears listed in the
OSPFv3 Interface Table
window. To return to the
OSPFv3 Interface Table
window, click the
Show All OSPFv3 Interface Entries
link.
OSPFv3 interface settings are described below. Some OSPFv3 interface settings require previously configured OSPFv3 settings.
Read the descriptions below for details.
Parameter
Description
227
