xStack
®
DGS-3600 Series Layer 3 Managed Gigabit Ethernet Switch
Parameter
Description
IP Address
Enter the IP network address to be aggregated.
Netmask
Enter the netmask of the IP network address to be aggregated.
Summary Only
Tick this check box to stop more specific routes from being advertised. The default setting is
unticked.
AS Set
Tick this check box to generate Autonomous System set path information. The default setting
is unticked.
Click
Apply
to implement changes made. To remove an entry from the table, click its corresponding
under the Delete heading.
BGP Network Settings
This window is used to specify the network advertised by the Border Gateway Protocol (BGP).
To view this window, click
L3 Features > BGP > BGP Network Settings
, as shown below:
Figure 4- 135. BGP Network Settings window
To configure BGP network settings on the Switch, complete the following fields:
Parameter
Description
IP Address
Enter the IP address of the local network that BGP will advertise.
Netmask
Enter the netmask of the local network that BGP will advertise.
Route Map
Enter the route map to be applied to the advertised networks. If not specified, all networks are
advertised.
Click
Apply
to implement changes made. To remove an entry from the table, click its corresponding
under the Delete heading.
275
