xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
552
77
S
WITCH
P
ORT
C
OMMANDS
The switch port commands in the Command Line Interface (CLI) are listed (with the appropriate parameters) in the
following table.
Command
Parameters
config ports
[ <portlist> | all ] {medium_type [fiber | copper]} { speed[auto
{capability_advertised {10_half | 10_full | 100_half | 100_full | 1000_full } }|
10_half | 10_full | 100_half | 100_full | 1000_full {[master | slave]} ] |
auto_negotiation restart_an |flow_control [enable | disable] | learning [enable |
disable ] | state [enable | disable] | [description <desc 1-32> | clear_description]}
show ports
{<portlist>} {[description | err_disabled | auto_negotiation | details | media_type]}
Each command is listed, in detail, in the following sections.
