xStack
®
DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch CLI Manual
448
59
P
ASSWORD
R
ECOVERY
C
OMMANDS
The Password Recovery commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
Command
Parameters
reset config
{force_agree(1)}
reboot
{force_agree(1)}
reset account
reset password
{<username>}
show account
Each command is listed, in detail, in the following sections.
reset config
Purpose
Used to reset the configuration.
Syntax
reset config {force_agree(1)}
Description
Used to reset the configuration.
Parameters
force_agree
– Specify to forcibly agree with the command.
Restrictions
This command is only available in password recovery mode.
Example usage:
To reset the configuration:
DGS-3450:admin# reset config
Command: reset config
Are you sure to proceed with reset config ?(y/n) y
Success.
DGS-3450:admin#
reboot
Purpose
Used to exit Reset Configuration Mode and restart the switch.
Syntax
reboot {force_agree(1)}
Description
The reboot command exit Reset Configuration Mode and restart the switch. And it pops out a
confirmation message to save the current setting.
Parameters
force_agree
– Specify to forcibly agree with the command.
Restrictions
This command is only available in password recovery mode.
Example usage:
To exit Reset Configuration Mode and restart the switch:
